Safety precautions
When using your device while driving, follow local regulations in the region you are in.
Never disassemble or modify your device for any reason. Doing this may cause the
•
device to malfunction or become combustible. Bring the device to an authorised
service centre to repair it.
Keep your device and all accessories out of the reach of small children or animals.
•
Small parts may cause choking or serious injury if swallowed.
Avoid exposing your device to very cold or very hot temperatures (below 0 °C or
•
above 45 °C).
Extreme temperatures can cause the deformation of the device and reduce the
charging capacity and life of your device.
Do not allow your device to get wet — liquids can cause serious damage. Do not
•
handle your device with wet hands. Water damage to your device can void your
manufacturer’s warranty.
Avoid using your device’s light close to the eyes of children or animals.
•
Do not use the device during a thunderstorm. Thunderstorms can cause the device
•
to malfunction and increase the risk of electric shock.
Excessive exposure to loud sounds can cause hearing damage. Exposure to
loud sounds while driving may distract your attention and cause an accident.
Use only the minimum volume setting necessary to hear your conversation.
Instructional icons
Before you start, familiarise yourself with the icons you will see in this manual:
Warning
—situations that could cause injury to yourself or others
Caution
—situations that could cause damage to your device or other
equipment
Note
—notes, usage tips, or additional information
Getting started
Your device overvie
Make sure you have the following items: device, replacement nibs, nib
•
extractor tool, travel adapter and user manual. The supplied items may vary.
Do not apply any excessive pressure to the Pen clip.
•
Button functions
Button
Function
PoweAr
button
Press to turn the device on or off.
•
Talk
button
Press and hold for 3 seconds to enter Pairing mode.
•
Press to answer or end a call.
•
Press and hold to reject an incoming call.
•
Press and hold to place a call on hold.
•
Press and hold to switch between calls.
•
Volume
button
Press to adjust the volume.
•
Press and hold to turn the microphone on or off during a call.
•
Side
button
Press and hold to perform various actions of S Pen.
•
Charging the S Pen
This device has a rechargeable internal battery which is non-removable. Make sure the
device is fully charged before using it for the first time.
Use only Samsung-approved chargers. Unauthorised or Non-Samsung chargers
could cause damage to the device or in extreme circumstances an explosion, it
could also invalidate any warranty on the product.
Connect the travel adapter to the charging socket on the device.
1
Plug the travel adapter in to the wall socket. During charging, the indicator light will turn
2
red. If charging does not begin, unplug the travel adapter and plug it in again.
When the device is fully charged, the red indicator light changes to blue. Unplug the travel
3
adapter from the wall socket and the device.
Duration of charging and operating the device
Charging time
Operating time
2 hours
Talk time
Hold time
3 hours
130 hours
Repeatedly charging and discharging of the headset, over time will cause the
battery performance to diminish. This is normal for all rechargeable batteries.
Turning the Bluetooth on or off
You can use the Bluetooth feature when the device is turned on.
To turn on your device, Press and hold the Talk button. The blue indicator light flashes
•
4 times.
To turn off your device, Press and hold the Talk button for 3 seconds. The indicator
•
lights flashes blue and red then turns off.
Turning the device on for the first time, it will automatically enter pairing mode for
approx. 3 minutes.
Turning the indicator light on or off
The Headset status light is there to show you the current status of your headset, but if it
bothers you at night, you can turn it off.
Press and hold both Volume buttons simultaneously to turn the indicator light on
•
or off.
You cannot switch the indicator off while in pairing mode.
•
The indicator light will always work when the device is turned on or off, when a
•
call is received, in Pairing mode and when the battery is low.
Using your device
Activated functions and features may differ depending on the phone type.
•
Some devices, especially those that are not tested or approved by the
•
Bluetooth Special Interest Group (SIG), may be incompatible with your device.
To ensure you get the best performance from your device
Keep the distance between your device and device as small as possible and avoid
•
placing your body or other objects in the signals path.
If you usually use your mobile phone with your right hand, wear the device on your
•
right ear.
Covering your device or device could effect its performance so keep contact
•
to a minimum.
Checking the battery level
To check the battery level, press and hold the Volume down button and the Talk button
at the same time. Depending on the battery level, the indicator light flashes 5 times in
one of the following colours:
Battery level
Indicator light colour
Above 80%
Blue
80 ~20%
Violet
Below 20%
Red
When the device battery is low
The device indicator light flashes red and you can hear beeps. If the device powers off
during a call, the call will be automatically transferred to the phone.
Using the S Pen
S Pen offers all the great features of your device in addition to traditional controls, such
as tapping or flicking. Hold the pen in location where you can press the side button by
your thumb or forefinger.
Press and hold the side buttons to perform the following actions.
Back : Drag the S Pen to the left to return to the previous screen.
•
Menu : Drag the S Pen up to access a list of options.
•
Screen capture : Tap and hold the screen to capture a screen shot.
•
Quick memo : Double-tap to launch the quick memo function.
•
S Pen may function differently or malfunction
depending on the device and applications
when in use.
Replacing the pen nib
Grasp the tip of the nib in S Pen with the groove of nib extractor tool and gently pull the
1
nib out.
Insert a new nib into the tip of S Pen where you just removed the old nib until it clicks
2
The black nib should be replaced with new one, if the white portion becomes
•
worn out.
Do not insert the round end of the pen nib into the S Pen. This may damage
•
the S Pen or device.
Do not over press the nib when you insert the tip into the S Pen.
•
Be careful not to clip your finger into the nib extractor.
•
Do not re-use old pen nibs. Used pen nibs might cause your pen to
•
malfunction.
Pairing and connecting the device
Pairing means a unique and encrypted wireless connection between two Bluetooth
devices when they agree to communicate with each other.
In Pairing mode, two devices should be placed close enough.
Pairing and connecting the device with a phone
Enter Pairing mode. The blue indicator light stays lit and stays for 3 minutes.
1
When your device is turned off, press and hold the Talk button for 3 seconds.
•
When your device is turned on, press and hold the Talk button and Volume up
•
button at the same time for 3 seconds.
Activate the Bluetooth feature on your phone and search for the device
2
(see your phone’s user manual).
Select the device (
3
HM5100
) from the list of devices found by your phone.
If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the device to your
4
phone. Once pairing is completed, the device will attempt to reconnect each time you
turn it on.
Your device supports the Simple Pairing feature which allows the device to
be paired with a phone without requesting a PIN. This feature is available for
phones that are compliant with Bluetooth version 2.1 or higher.
Pairing via the Active pairing feature
With the Active pairing feature, your device automatically looks for a Bluetooth device
within range and tries to make a connection with it.
Make sure the phone’s Bluetooth visibility option is set on.
In Pairing mode, press and hold the Talk button on the device. The violet indicator light
turned on.
Keep the distance between the Bluetooth phone you want to connect with and
•
your device.
This feature may not be supported on some devices.
•
Connecting with two Bluetooth phones
With the Multi-point feature activated, your device can be connected to 2 Bluetooth
phones at the same time.
To turn Multi-point feature on
In Pairing mode, press and hold the
Volume up button.
The indicator light flashes blue.
To turn Multi-point feature off
In Pairing mode, press and hold the
Volume down button.
The red indicator light flashes twice.
After connecting with the first Bluetooth phone,
1
Enter pairing mode by pressing both TalK button and Volume up button at the same time
2
for 3 seconds.
Activate the Bluetooth feature on the second Bluetooth phone and search for the device
3
Select the device (
4
HM5100
) from the list of devices found by the second Bluetooth phone.
If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the device to the second
5
Bluetooth phone.
Reconnect to the device from the first Bluetooth phone.
6
Some phones may not be able to connect as a second Bluetooth phone.
Reconnecting the device
If the connection is lost while in use:
Press the Talk button on the device or use the Bluetooth menu on your phone.
•
When the device is paired with a phone, it will attempt to automatically
reconnect each time you turn it on. If the Multi-point feature is activated, your
device will attempt to reconnect to the two most recently connected devices
each time you turn it on.
Speaker
Charging socket
Microphone
Pen point
Pen clip
Volime button
Talk button
Side button
Printed in China
GHXX-XXXXXX
English. 07/2012. Rev. 1.0
-1-
-2-
-3-
Please read this manual before operating your headset, and keep it for future reference.
Understand all safety precautions before using your headset to ensure safe and proper
use.
Graphics used in this manual are for illustration purposes. The actual products may vary.
User manual
HM5100
