Safety precautions
To prevent injury to yourself and others or damage to your device, read the safety information
about your device before using the device.
•
Comply with all safety warnings and regulations regarding mobile device usage while
operating a vehicle.
•
Do not disassemble, modify, or repair your device. Any changes or modifications to your
device can void your manufacturer’s warranty. If your device needs servicing, take your
device to a Samsung Service Centre.
•
Do not bite or suck the device. Children or animals can choke on small parts.
•
Do not store your device in very hot or very cold areas. It is recommended to use your device
at temperatures from 5 °C to 35 °C. Extreme temperatures can damage the device and
reduce the charging capacity and life of your device and battery.
•
Do not use your device while it is charging or touch your device with wet hands.
•
Keep your device dry. Humidity and liquids may damage the parts or electronic circuits in
your device. Water damage to your device can void your manufacturer’s warranty.
•
Do not use your device outdoor during a thunderstorm. Doing so may result in electric shock
or device malfunction.
Excessive exposure to loud sounds can cause hearing damage. Exposure to loud
sounds while walking may distract your attention and cause an accident.
Your headset overview
Make sure you have the following items: headset, travel adapter and user manual. The
supplied items may vary.
Power switch
Indicator light
Microphone
Earpiece
Volume button
Ear hook
Charging socket
Talk button
HM1350
•
This manual’s images and content may differ from the product.
•
You can access the full user manual for more information. Visit www.samsung.com and then
search for the user manual using the model name of the device.
Quick Start Guide
Printed in China
English (EU). 09/2016
GH68-42177A Rev.1.3
Charging the headset
This headset has a rechargeable internal battery which is non-removable. Make sure the
headset is fully charged before using it for the first time.
Use only Samsung-approved chargers. Unauthorised or Non-Samsung chargers could
cause damage to the headset or in extreme circumstances an explosion, it could also
invalidate any warranty on the product.
1
Connect the travel adapter to the charging socket on the headset.
2
Plug the travel adapter in to the wall socket. During charging, the indicator light will turn
red.
3
When the headset is fully charged, the red indicator light changes to blue. Unplug the
travel adapter from the wall socket and the headset.
Charging time
Approximately 2 hours*
Talk time
Up to 8 hours*
Standby time
Up to 300 hours*
* Depending on the phone type and usage, the actual time
may vary.
•
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
•
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Turning the headset on or off
To turn the headset on
Slide the Power switch on. The blue indicator light flashes 4 times.
Turning the headset on for the first time, it will automatically enter pairing mode for
approx. 3 minutes.
To turn the headset off
Slide the Power switch off. The indicator light flashes blue and red then turns off.
Turning the indicator light on or off
The Headset status light is there to show you the current status of your headset, but if it
bothers you at night, you can turn it off.
•
Press and hold both Volume buttons simultaneously to turn the indicator light on or off.
•
You cannot switch the indicator off while in Pairing mode.
•
The indicator light will always work when the headset is turned on or off, when a call is
received, in Pairing mode and when the battery is low.
Wearing the headset
Depending on which ear you are going to wear the headset, simply adjust the ear hook
accordingly.
Pairing and connecting the headset
Pairing means a unique and encrypted wireless connection between two Bluetooth devices
when they agree to communicate with each other.
In Pairing mode, two devices should be placed close enough.
Pairing and connecting the headset with a phone
1
Enter Pairing mode (The blue indicator light stays lit and stays for 3 minutes).
•
Press and hold the Talk button for 3 seconds.
2
Activate the Bluetooth feature on your phone and search for the headset (see your phone’s
user manual).
3
Select the headset (HM1350) from the list of devices found by your phone.
•
If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to
your phone. Once pairing is completed, the headset will attempt to reconnect each time
you turn it on.
Left
Right
