manualshive.com logo in svg

Samsung HL61A750A1FXZA, Service Manual, Page: 78 / 102

Share
Download
Samsung HL61A750A1FXZA Service Manual Download Page 78

Schematic Diagram

7-2

Samsung Electronics

7-2  K880 Engine

Engine

Image

Description

▶

 Actuator: used to get the smooth picture as shaking Mirror in the 60Hz.

▶

 LED Driver : Controls LED Turn and Color-sensor & drivers DMD Panel.

▶

 LED : KEY COMPONENTS which are used to make  R,G,B Colors.

▶

 Illumination Part : KEY COMPONENT which consists of Lens, Reflection-mirrors, and Light Tunnel.  

It is used to mix colors from the LEDs, which is then displayed on  the screen.

▶

 Fan : put heat, generated from LEDs and DMD Board, out of SET.

▶

 Color Sensor : checks the color passing in the illuminance part, then feedback the color status 

to the LED Driver.

▶

 DMD Board : makes a screen data, received from Main board, as a real screen in the DMD panel.

Actuator

LED Driver 

FAN3 

FAN2 

FAN1 

LED 

Color Sensor 

DMD Board 

Illumination Part

justmanuals.com

Summary of Contents for HL61A750A1FXZA







































































































Reviews:

No comments