manualshive.com logo in svg

Samsung HL61A750A1FXZA, Service Manual, Page: 35 / 102

Share
Download
Samsung HL61A750A1FXZA Service Manual Download Page 35

Troubleshooting

Samsung Electronics

4-3

■  Installation & Connection

●

: Light is On

◑

: Light is Blinking

○

: Light is Off

TIMER

LED

STAND BY/

TEMP

Indication

●

○

○

Standby state.

○

○

◑

The picture will automatically appear in about 15 seconds.

○

●

○

Auto Timer ON/OFF has been set and the set will automatically be turned on in about 15 seconds.

◑

◑

○

A cooling fan inside the set is not operating normally.

◑

○

○

The inner Power Signal on the main board may be short or opened. Please contact a certified 

technician.

◑

◑

◑

LED may be defective. Please contact a certified technician.

■  Protect Status 

1.  Attempting to turn the LED ASSY on fails repeatedly 

If turning the LED on fails, the set automatically tries turning the LED ASSY on 3 times. If all attempts fail, all LED’s on the front 

panel will blink. Check the LED ASSY, LED Driver and the Sub power or SMPS and replace them if necesscary.

Summary of Contents for HL61A750A1FXZA







































































































Reviews:

No comments