Samsung HG43RU710N Install Manual Download Page 29

Page: 29 / 56

Admin menu items

To exit from this menu, turn off (or turn off and unplug the power cable if you have changed SI vendor) the TV, and then
turn on again. Any changes you made are saved.

•

The menu items may not be supported depending on the models.

Admin menu Item

Description

Hospitality Mode

Select

Hospitality Mode

•

Interactive

: TV works with an SI STB or SBB.

•

Standalone

: TV works alone, without an SI STB or SBB.

SI Vendor

•

Interactive

: Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /

SeaChange /

MDC

/ Innvue

•

Standalone

: OFF / SSCP

SI Config

MDC ID Settings

Assigns an individual

MDC ID

•

This function only available when

MDC

is selected in

Interactive SI Vendor

Power On

Power On Channel

Set the channel to display when the TV is turned on.

•

User Defined

: Lets you set the channel number manually on

Power On Channel

Num

. See

Power On Channel Num

below.

•

Last Saved

: If you select this item, when the TV is turned on, it displays the

channel it was displaying when it was turned off.

Power On Channel Num

When the TV is turned on, it switches automatically to this channel.

Power On Channel Type

Select the type of the channel will be displayed when the TV is turned on.

ATV

(analog air band),

DTV

(digital air band),

CATV

(analog cable band),

CDTV

(digital

cable band),

IPTV

(IP channel,

IPTV

is set when deployed from solution.)

Power On Volume

Set volume level when the TV is turned on.

•

User Defined

: Lets you set volume level manually.

•

Last Saved

: When the TV is turned on, it returns to the volume that had been set

when the power had been turned off.

Power On Volume Num

The TV turns on with set volume level in

Standalone

mode.

Min Volume

The minimum volume level the user can set in

Standalone

mode.

Max Voume

The maximum volume level the user can set in

Standalone

mode.

Power On Source

Select the input source to be displayed when the TV is turned on.

Power On Option

Determines the TV's state when power returns after a power failure or after you have

unplugged the TV and then plugged it in again.

•

Last Option

: Returns to its last power state. If it was in standby mode, it returns to

standby mode. If it was on, it turns on.

•

Power ON

: When the power returns, the TV turns on.

•

Standby

: When the power returns, the TV enters the standby mode.

English - 29

Summary of Contents for HG43RU710N

























































Search results

Summary of Contents for HG43RU710N

Reviews:

Related manuals for HG43RU710N

Brands by name

Popular brands

Samsung HG43RU710N, Install Manual

Search results

Summary of Contents for HG43RU710N

Reviews:

Related manuals for HG43RU710N

Brands by name

Popular brands