1. List of Parts
•
The provided accessories may vary depending on the model.
1
2
3
Samsung Smart Remote
Power Cable
Warranty Card / Quick Setup Guide /
Regulatory Guide
(Not available in some locations)
4
5
Data Cable
Antenna adapter
Quick Setup Guide
To register this product please visit www.samsung.com
-01
2. Installing the LED TV Stand
Assembling the Stand and Components
When installing the stand, use the provided components and parts.
Stand
Holder-Cable
1
25 mm
•
Place a soft cloth over the table to protect the TV, and then place the TV so that its screen faces down toward the
table surface.
2
•
Insert the Stands into the slot on the bottom of the TV.
•
Slide and assemble it to the end line in the direction of arrow.
3
43″
50-75″
NOTE
•
Make sure to distinguish between the front and back of each component when assembling them.
•
Make sure that at least two persons lift and move the TV.
3. The Connection Panel
O
HDD
ARC
USB
LAN
ANT IN
LAN
DATA
Volume Control Box
SPEAKER
BACK OF TELEVISION
4. Connecting the antenna adapter
Connect the provided antenna adapter to an antenna terminal on the wall, and then connect the antenna cable, which is
connected to ANT IN on the TV, to the antenna adapter.
The connected antenna adapter prevents overload that may occur due to potential difference between the antenna
terminal on the wall and the antenna cable, consequently being able to prevent product damage or fire.
•
Be sure to use the provided antenna adapter.
•
The method for connecting the antenna adapter and the markings on the antenna terminals may differ depending on
the model and geographical region.
•
If you use the antenna adapter where antenna signals are weak, the screen may become blurry.