Assembling
14
Charge with a USB cable
›
Before charging, ensure that your PC is turned on.
Plug one end (micro-USB) of the USB cable into the
1
multifunction jack.
Plug the other end of the USB cable into a USB port on a
2
PC.
Depending on the type of USB cable you are using, it
may take some time before charging begins.
When the battery is fully charged, first unplug the USB
3
cable from the device and then from the PC.
Attach a hand strap (optional)
Remove the back cover.
1
Slide a hand strap through the slot and hook it over the
2
small projection.
Replace the back cover.
3
Summary of Contents for GT-S7530
Page 1: ...GT S7530 usermanual ...