![background image](http://html.mh-extra.com/html/samsung/gt-e2330b/gt-e2330b_service-manual_1192404025.webp)
SAMSUNG Proprietary-Contents may change without notice
7. Level 2 Repair
7-3
This Document can not be used without Samsung's authorization
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage!
1) Beware that you do not damage FPCB
1) Beware that you do not damage FPCB
1
) After separating MOTOR using detach
point, separate RECEIVER FPCB from
UPPER
13
1
) Twist LOWER to left/right and remove
UPPER lower hook
2) Pass slide FPCB to LOWER insertion
hole, and separate LOWER
9
1
) Remove insulation tape attached to LCD
lower PCB
10
2
1
1) After turning over slide FPCB and RCV +
MOT assy FPCB connector actuator,
remove FPCB horizontally
12
Detach point
2
1