Samsung GT-C3530 Service Manual Download

Page: 1 / 80

GSM TELEPHONE

GT-C3530

1. Safety Precautions
2. Specification
3. Product Function
4. Exploded View and Parts list
5. MAIN Electrical Parts List
6. Level 1 Repair
7. Disassembly and Assembly

Instructions

8. Chart of Troubleshooting
9. Reference data

Notice :

All functionality, features, specifications and other

product information provided in this document inclu

ding, but not limited to, the benefits, design, pricing,

components, performance, availability, and capabiliti

es of the product are subject to change without

notice or obligation. Samsung reserves the right to

make changes to this document and the product

described herein, at anytime, without obligation on

Samsung to provide notification of such change.

GSM TELEPHONE

CONTENTS

Summary of Contents for GT-C3530

















































































Search results

Summary of Contents for GT-C3530

Reviews:

Related manuals for GT-C3530

Brands by name

Popular brands

Samsung GT-C3530, Service Manual

Search results

Summary of Contents for GT-C3530

Reviews:

Related manuals for GT-C3530

Brands by name

Popular brands