![background image](http://html.mh-extra.com/html/samsung/gt-b7722-i/gt-b7722-i_service-manual_1192179070.webp)
SAMSUNG Proprietary-Contents may change without notice
7. Level 2 Repair
7-5
This Document can not be used without Samsung's authorization
5
1)Attach conductivity sponge on bottom left gnd fpcb.
2) Attach insulation tape on bottom right tsp
connector
6
7
1) Assemble camera connector after attach
flash led to tweezers
2) Overturn board and assemble cif camera
connector of backside
1) Catch board with both hand and assemble
intenna left/right hook part to 1 to 2
Order
2) Attach motor using at intenna hole.
1
2
1
1
2
1
8
2
1) Place main board vertically on front
assay.
1) attached depending on base line for attachment
1) When assembling intenna, take care so that motor wire is
not damaged.
1) Be careful to not to tear the FPCB.
2) Catch and disassemble fpcb's hard part when
disassembling tsp fpcb.
Be careful to not to tear the FPCB.