![background image](http://html.mh-extra.com/html/samsung/gt-b7702/gt-b7702_service-manual_1192174076.webp)
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
11-4
This Document can not be used without Samsung's authorization
7
1) Be careful not to damage FPCB.
1) Assemble B/T antenna on guide rib.[Figure 1]
< Figure 1 >
8
1) Assemble PBA Assy on Front Assy.[Figure 1]
< Figure 1 >
9
1) Make sure not to damage TSP FPCB, and combine properly.
2) 핀셋으로 주위 부품 파손에 주의한다.
1) Assemble TSP FPCB with tweezers.[Figure 1]
2) Assemble TSP FPCB fixing on the line with tweezers.[Figure 2 ]
< Figure 2
>
< Figure 1
>
10
1) Be careful not to damage FPCB LCD FPCB.
2) Check combining of FPCB.
1) Assemble LCD FPCB. [Figure 1]
< Figure 1 >
1,2) After assembling, make sure there are no gap.
11
1) Hook left of Up_side of REAR. [Figure 1]
2) Hook Up_side and right of REAR.[Figure 2]
TSP FPCB
1) Be careful not to jammed TSP FPCB and LCD FPCB .
2) Be careful not to damage FPCB, and double check the
combining.
LCD FPCB
< Figure 1 >
< Figure 2 >
TSP FPCB
B/T Antenna FPCB
LCD FPCB
Screw(M1.4,L3.5)
Torque
1.1 ~
1.3Kgf.cm
< Figure 1
>
1) SCREW 6 POINT.[Figure 1]
1) Be carful about SCREW type and Torque.
12