103
While the Say a command screen displays you have two options:
•
Tutorial
: provides examples of how to use the voice commands.
•
Settings
: lists the settings for voice command software such as: Confirmation, Adaptation, Audio Modes, Speakerphone,
and About.
If the phone does not recognize your command the Command not recognized press
Settings
➔
Restart
. The Restart
command allows you to try to command options again.
Speak clearly when giving your command. There is no need for you to speak slowly or with added emphasis. The
voice recognition software has been optimized to understand your speech in its natural form. If it does not recognize
your command after a few seconds, a voice prompt asks you to repeat the command. If it does not recognize your
command again, the following message displays “Sorry, no match found,” and voice recognition turns off.
Important!:
You must end your current Voice Commands call before you can make another call.
Voice Recognition Tips
•
Wait for the tone before you speak.
•
Speak clearly and at a normal volume.
•
There is no need to use paused speech. The voice recognition software has been trained to recognize natural speech, and
performs best when you speak naturally.
•
In very noisy environments, it may be helpful to use the supplied earset or optional Bluetooth headsets.
Contacts List Voice Activation
On startup Nuance reads your Contacts list and voice-activates all the names.
When you have add or change contacts, Nuance automatically reloads and voice-activates the list when you add or
modify a contact.
Name Dialing
To use Name Dial, you need contacts stored in Contacts. For more information, refer to
“Using the Contacts List”
on
page 62.
To access Voice recognition
:
1.
In Idle mode, press
Menu
➔
Organizer
➔
Voice recognition
.
