STEP 2
•
The next step requires you to heat around the frame
of the back glass. Now when you heat around the
frame do it in a constant movement do not let it rest
in just one area.
•
You will need to use some type of cards or thin picks
so slide underneath each part you release from the
adhesive so it doesn’t stick back down.
•
Take the isesamo or painters knife and slide it in
between where the glass and frame meet. You want
to slide it around the frame if it seems the adhesive
has cooled down heat around the frame again. This
process you will continue as you try to loosen up the
whole back glass.
Disassemble the device
Tools: isesamo or painters knife, heat
gun, plastic cards
Summary of Contents for Galaxy S7
