Applications and Widgets 132
Configure your Device as a Remote
1.
Touch
Remote Control
➔
Continue
.
2.
Touch
Set up now
at the prompt.
3.
Select your TV’s manufacturer name from the
Select
your TV Brand
screen.
– or –
Touch the
Show other brands
or
I have a projector
button if you own a TV brand or projector other than
those listed.
4.
Aim your device at the TV and touch
Power
to turn
on your TV with the remote.
5.
Touch
Yes, this code works
if the TV is turned on.
– or –
Touch
No, text next code
, or
Send this code again
if the
TV did not turn on.
6.
Select your current channel control method:
• Set-top Box
: selected when changing channels through a
receiver box. Channels are not changed using the TV remote
but rather through the receiver/box.
• My XXX TV
: selected when a signal is fed directly into the TV
without using a box. Channels are changed directly on the TV
by using the TV remote.
Note:
Try matching your current channel selection method.
7.
Select the Satellite Box Brand from the available list.
For example, DirectTV
®
.
8.
Touch
Show other brands
if your brand does not display in the
list, and follow the displayed instructions.
Important!
You must configure your set top box for IR
communication with your device. If you do not
select
More info
below and follow the on-screen
instructions you may not be able to properly use
the application.
9.
Touch
More info
at the prompt to learn how to configure
your set top box to receive and respond to IR controls.
10.
If prompted, place a check mark in the
Notification
Panel
field and touch
Done
. This allows you to pin a
shortcut to your remote on the Notification Panel.
11.
Press
(
Back
).