![background image](http://html.mh-extra.com/html/samsung/galaxy-s-ii-gt-i9100/galaxy-s-ii-gt-i9100_service-manual_339933031.webp)
SAMSUNG Proprietary-Contents may change without notice
Level 3 Repair
8-5
This Document can not be used without Samsung's authorization
8-3-1. Power On
Check the PK601
(soldering crack, open, etc)
Cell-phone can`t power on.
Change the PK601(Power-key FPCB)
And retry to the power-on operation.
END
No
Yes
Check the U501 output voltage
(C535 > 2.0V, C554 > 1.2V)
If the output voltage is not satisfied with normal
condition, Change the U501.
※
Each voltage level has
±
10% margin.
No
Yes
Check the U501 output signal
(AP_PS_HOLD(TP) > 2.8V)
If the output voltage is not satisfied with normal.
condition, Change the U501.
※
Each voltage level has
±
10% margin.
No
Yes
Check the Battery Voltage
.
Is it more than 3.6V?
Charging the battery by TA.
If its voltage level is extremely low(under 3.0V),
Change the battery.
check the initial operation
Yes
Abnormal
Check the Clock OSC500(TP213)
Is that frequency 32Khz?
Change the OSC500.
If OSC400 does not still work, Change the U501
This problem is internal oscillator of U501.
※
Test condition (Oscilloscope setting)
: 20.0us.div (time division)
No
Yes
Summary of Contents for Galaxy S II GT-I9100
Page 104: ...www s manuals com ...