24
Safety Precautions
Attaching the back cover
Check the orientation of the back cover and attach it fitting to the
out-camera, then press firmly and install making sure there are no gaps.
Press firmly and make sure
there no gaps between the cover and
the main unit.
● Do not immerse the product in water with soap, detergent or bath salts in it.
● Do not immerse the product in seawater, a swimming pool or hot spring.
● Do not immerse the product in any liquid (alcohol, etc.) other than water.
● Do not place the product directly on the sand at a beach, etc. Sand or
other small particles might get inside the earpiece, speaker, etc. causing
the volume to drop. If sand gets inside the product's main unit, it might
cause overheating or a fault.
● Do not use the product underwater.
● Do not leave the product in a humid place such as a bathroom or kitchen
for an extended period of time.
〈例〉
Soap/detergent/
bath salts
Seawater
Bath/
hot spring
Sand/mud
Tips for comfortable use
● Once the product gets wet, water may remain in gaps on the main unit.
Shake the product well to drain water. Especially make sure to drain
water remaining in back cover, key part, charging terminals, headset
connection terminal and speaker.
● Even after the water is drained, the inner parts might still be wet.
Although you can use the product, do not place it near things that must
not get wet. Take care not to wet your clothes, bag or contents of the
bag.
● Drain water if it becomes temporarily hard to hear the sound due to
water remaining in microphone.
■ Notes on various usage scenes
< In the rain>
You can make calls holding the product with wet hands in the rain
without an umbrella.
• The rain in this case means a moderately-heavy rain (less than 20
mm per hour).
• Water drops on the display might cause errors in the touch panel
operation.
• Never open/close the microUSB connection terminal cover or back
cover if the product is exposed to rain, or your hands are wet.
<In the shower>
You can make calls holding the product with wet hands while taking a
shower.
• Avoid spraying the product with high-pressure water, as the
product is not designed to withstand high water pressure.
<Washing>
You can wash the product under a mild flow (6 liters per minute or
less) of tap water at room temperature (5℃ to 35℃ ) at a distance of
about 10 cm from the faucet or showerhead.
• Do not spray the product with high-pressure water or submerge
it in water for extended periods of time, as the product is not
designed to withstand high water pressure.
• Make sure to hold the microUSB connection terminal cover not
to open, wash the product with your hands. Do not use a brush or
sponge.
• Do not wash the product in a washing machine or ultrasound bath.
• Do not splash the product with or immerse it in soap water,
detergent water, etc. other than tap water.
Summary of Contents for GALAXY S 5 SCL23
Page 1: ...Basic Manual SCL23 ...
