Call Functions 59
Press the
Up
volume key to increase the volume level
and press the
Down
volume key to decrease the
volume level.
From the Home screen, you can also adjust the ringer volume
using these same keys.
In-Call Options
During an active call there are several functions available by
tapping a corresponding on-screen button.
•
Hold
: place the current active call on hold.
•
Add call
: displays the dialer so you can call another person.
•
Keypad
: displays the on-screen keypad, where you can
enter number using DTMF (Dual Tone Multi-Frequency).
•
End call
: terminates the call.
•
Speaker
: routes the phone’s audio through either the speaker or
through the earpiece.
–
Tap
Speaker
to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.) A green line
displays under the Speaker button.
–
Tap
Speaker
again
to use the phone’s earpiece (see
“Using
the Speakerphone During an Active Call”
on page 61.). The
green line will turn grey when Speaker is not activated.
•
Mute
: turn the onboard microphone either on or off.
–
Tap
Mute
during a call to mute the microphone. A green line
displays under the Mute button.
–
Tap
Mute
again to unmute the microphone. The green line will
turn grey when Mute is not activated.
•
Headset
: connects to a Bluetooth headset.
–
Tap
Headset
during a call to activate a Bluetooth headset. A
green line displays under the Headset button.
–
Tap
Headset
again to de-activate the Bluetooth headset. The
green line will turn grey when the Headset is not activated.
•
Press
for more options:
–
Contacts
: allows you to go to your Contact list.
–
Memo
: allows you to jot down a memo during a call.
–
Noise suppression on/off
: allows you to turn on the Noise
Suppression feature when you are in a noisy area. Turn it Off
when not needed to conserve battery power.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.
1.
While on a call, tap
Hold
. This action places the
current caller on hold (which displays on-screen as a
greyed-out box).
2.
You can later reactivate this call by tapping
Unhold
.