![background image](http://html.mh-extra.com/html/samsung/galaxy-feel2/galaxy-feel2_instruction-manual_339483013.webp)
11
Contents/Precautions
4. Handling docomo nano UIM card
CAUTION
Do
Be careful of the cut surface when handling a docomo nano
UIM card as it may damage a part of your body such as
fingers, etc.
May cause injuries, etc. by the sharp cut surface.
5. Handling mobile phones near electronic medical
equipment
WARNING
Do
Wearers of medical equipment such as implanted pacemakers
or defibrillators must carry and use the terminal at least 15
cm away from the implanted device.
The terminal's signal may affect the performance of electronic
medical equipment.
Do
When electronic medical equipment other than implanted
pacemakers or defibrillators are in use outside of medical
facilities (such as in home care settings), check with the
device manufacturer to determine how the device is affected
by electrical signals.
The terminals signals may affect the performance of electronic
medical equipment.
Do
Make sure that the terminal will not emit any signals (turn off
power, put it in Airplane mode, etc.) if within 15 cm of those
around you, such as where crowded and you cannot move freely.
There may be wearers of medical equipment such as implanted
pacemakers or defibrillators around you. The terminal's signal may
affect the performance of electronic medical equipment.
Do
When using the terminal in a medical facility, be sure to
observe the regulations of the facility.
The terminal's signal may affect the performance of electronic
medical equipment.
6. Material list
Part
Material
Surface treatment
Display (touch screen)
Hardened glass
AF coating
Exterior case (side)
Aluminum
Anodic oxidation
treatment
docomo nano UIM card/microSD card
tray
PC
Laser engraved
docomo nano UIM card/microSD card
tray (side)
Aluminum
Anodic oxidation
treatment
docomo nano UIM card/microSD card
tray (waterproof packing)
Silicone
-
Rear panel
Hardened glass
Laminate (PET film)
+ AS coating
Fingerprint sensor (center area)
Epoxy
Spray finish
Fingerprint sensor (surrounding area) Aluminum
Anodic oxidation
treatment
Power key/screen lock key, Volume
UP key/Volume DOWN key
Aluminum
Anodic oxidation
treatment
Earpiece
Aluminum
Anodic oxidation
treatment
Rear camera (lens panel)
Hardened glass
-
Rear camera lens (surrounding area)
Aluminum
Anodic oxidation
treatment
Flash/Light
Hardened glass
-
USB Type-C jack
Heat resistant
plastic
-
USB Type-C jack (surrounding area)
PC
-
Headphone connection jack
Copper/titanium
alloy
Nickel plating and
Gold plating
Headphone connection jack
(surrounding area)
PPA
-