![background image](http://html.mh-extra.com/html/samsung/galaxy-exhibit-4g/galaxy-exhibit-4g_user-manual_339465205.webp)
Health and Safety Information 201
guidelines. The maximum SAR values for this model
phone as reported to the FCC are:
Cellular/PCS WCDMA/GSM/EDGE and AWS WCDMA
•
Head: 0.76 W/Kg.
•
Body-worn Accessory: 0.86 W/Kg.
•
Product Specific (Wireless Router): 1.00 W/kg;
•
Simultaneous Transmission: 1.04 W/kg.
WLAN
•
Head: 0.16 W/Kg.
•
Body-worn Accessory: 0.18 W/Kg.
•
Product Specific (Wireless Router): 0.18 W/kg;
•
Simultaneous Transmission: 1.04 W/kg
SAR information on this and other model phones
can be accessed online on the FCC's website
through
http://transition.fcc.gov/oet/rfsafety/sar.html
. To
find information that pertains to a particular model
phone, this site uses the phone FCC ID number
which is usually printed somewhere on the case of
the phone. Sometimes it may be necessary to
remove the battery pack to find the number. Once
you have the FCC ID number for a particular phone,
follow the instructions on the website and it should
provide values for typical or maximum SAR for a
particular phone. Additional SAR information can
also be obtained at
http://www.fcc.gov/encyclopedia/specific-absorption-
rate-sar-cellular-telephones
.
FCC Part 15 Information to User
Pursuant to part 15.21 of the FCC Rules, you are
cautioned that changes or modifications not
expressly approved by Samsung could void your
authority to operate the device.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician
for help.
T679.book Page 201 Friday, March 16, 2012 2:38 PM