Tools
The Tools panel provides handy instruments for quick access.
1. From any screen, drag the
Edge handle
to the center of the screen. Swipe until
the Tools panel is displayed.
2. Tap a tool to use:
•
Compass
: Identify compass directions.
–
Tap
Calibrate
to calibrate the compass.
•
Tally counter
: Use the plus and minus icons to add or subtract while counting.
–
Tap
Vibration
to enable or disable vibrations with each addition or
subtraction.
–
Tap
Target
to set a total target number between 1 and 9999.
–
Tap
Reset
to reset the counter.
•
Flashlight
: Tap
Flashlight
to turn the flashlight on and off. Use the plus
and minus icons to increase or decrease the brightness of the light.
–
Tap
SOS
to make the flashlight signal the phrase “SOS” in Morse code.
•
Surface level
: Use the device to determine if a surface is level by placing the
device on the surface. The surface is level when the
x
and
y
values are close
to or equal to zero degrees.
–
Tap
Calibrate
to calibrate the level.
•
Ruler
: Use the edge of the device as a ruler to measure a straight line in
either inches or centimeters. Tap the unit name to change the units.
Configure Edge panels
You can customize the Edge panels.
1. From the Edge screen, tap
Settings
.
2. Tap
to enable the feature. The following options are available:
•
Checkbox
: Enable or disable each panel.
•
Edit
(if available): Configure individual panels.
•
Search
: Find panels that are either installed or available to install.
43
Getting started
