![background image](http://html1.mh-extra.com/html/samsung/eternity-ii-sgh-a597/eternity-ii-sgh-a597_user-manual_4160409073.webp)
Changing Your Settings 68
Connection can be made via either one of three available WAP
browsers: MEdia Net, AT&T MMS (MultiMedia Server), and AT&T
IMS. You need these settings to use the web browser or send
MMS messages or Emails.
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although the
active connection can be changed by the user, it is recommended
that this choice be made with the assistance of either the retailer
or customer service representative.
1.
From Idle mode, touch
➔
Settings
➔
Connectivity
➔
Network Profiles
.
2.
Touch one of these options:
• MEdia Net
• AT&T MMS
• AT&T IMS
Note:
The MEdia Net WAP and AT&T MMS are pre-configured and cannot be
altered on this screen. Your phone is set up by default for connecting to
the network.
3.
To create a new connection, touch
.
4.
Select the parameter you want to edit:
• Set Name
: enter a profile name.
• Access Name
: edit the access point name.
• Auth Type
: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID
: enter the User ID required to connect to the network.
• Password
: enter the user password required to connect to the
network.
• Protocol
: set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
• Home URL
: enter the URL address of the page to be used as your
homepage.
• Proxy Address
: MEdia Net set as the proxy server address and
port.
• Linger Time (sec.)
: set a time period (in seconds) after which the
network is disconnected if there has been no new data traffic in that
time.
• Advanced Settings
: allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic
Class.
–
Static IP
: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.
–
Static DNS
: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.
–
Traffic Class
: select the traffic class.
Create