Basic functions
16
Charging the battery and turning your camera on
Charging the battery
Before using the camera for the first time, you must charge the
battery. Attach the USB cable to the AC adapter, and then plug
the end of cable with the arrow mark ( ) into your camera.
Turning on your camera
Press [
] to turn your camera on or off.
•
The initial setup screen appears when you turn on the camera
for the first time. (p. 17)
Turning on your camera in Playback mode
Press [
]. The camera turns on and accesses Playback mode
immediately.
When you turn on your camera by pressing and holding [
] for about
3 seconds, the camera does not emit any camera sounds.
Status Lamp
•
Red
: Charging
• The LED lamp turns off when charging is complete.
