Samsung ED32C Page 42 User Manual Download

Page: 42 / 148

Connecting to a Video Device

•

Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.

•

You can connect a video device to the product using a cable.

―

Connecting parts may differ in different products.

―

Press the

SOURCE

button on the remote control to change the source.

Connection Using an HDMI-DVI Cable

―

Audio will not be enabled if the product is connected to a video device using

an HDMI-DVI cable. To resolve this, additionally connect an audio cable to
the audio ports on the product and video device. When you connect a video
device to the product using an HDMI-DVI cable, set

Edit Name

DVI Devices

to access video and audio content stored on the video device.

―

Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and

576p.

HDMI IN

Summary of Contents for ED32C





















































































































































Search results

Summary of Contents for ED32C

Reviews:

Related manuals for ED32C

Brands by name

Popular brands

Samsung ED32C, User Manual

Search results

Summary of Contents for ED32C

Reviews:

Related manuals for ED32C

Brands by name

Popular brands