manualshive.com logo in svg

Samsung EB40D, User Manual

Share
Download
Samsung EB40D User Manual Download Page 115

115

Eco Solution

Energy Saving

Eco Sensor

No Signal Power Off

Auto Power Off

Off

Off

15 min

Off

 

-

The displayed image may differ depending on the model.

No Signal Power Off

Save power by turning the device off when no signal is received from any source.

 

•

Off

 / 

15 min

 / 

30 min

 / 

60 min

 

―

Disabled when an attached PC is in power saving mode.

 

―

This product is set to 

15 min

 by default.

 

―

The product will automatically power off at a specified time. The time can be changed as required.

Auto Power Off

The product will automatically turn off if you don’t press a button on the remote or touch a button on product front panel 
within 4 hours to prevent overheating.

 

•

Off

 / 

On

 

―

The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number 

of hours.

 

―

This option is only available when 

Auto Power Off

 is set to 

On

.

 

―

For products for the market in some regions, the 

Auto Power Off

 is set to automatically activate 4 hours after the product 

powers on. This is done in accordance with power supply regulations. If you do not want the timer to activate, go to  

MENU

 

m

 

→

 

System 

→

 

Eco Solution

 and set 

Auto Power Off

 to 

Off

.

Summary of Contents for EB40D






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands