Operations
English
34
Operations
08
Damp Alert
This alert is available all Sensor Dry cycles except for
SANITIZE
and
ACTIVEWEAR
. Available dry levels are Normal, More, and
Extra.
If a load contains mixed fabrics, the Damp Alert indicator blinks
when average dryness of the item is 80 % dry. This lets you take
items that you don’t want fully dried or that dry quickly out of
the dryer early while letting others continue to dry.
09
Drum Light
Press to turn on or off the interior lamp. The lamp stays lit for 2
minutes after it has turned on, and then turns off automatically.
10
Adjust Time
You can change the set time in the Manual Dry cycles (
QUICK
DRY
,
TIME DRY
,
AIR FLUFF
, and
WRINKLE RELEASE
) and
WRINKLE AWAY
. To change the cycle time, press or until
the desired time is displayed.
11
Smart Care
This function enables you to check the status of the dryer using
a smartphone.
12
Power
Press to turn on/turn off the dryer.
13
Start/Pause (Hold
to Start)
Press to start or stop operation.
NOTE
Extremely tangled items finished by the washer may degrade the drying efficiency or
cause the door to open. We recommend that you untangle the items before drying.
Simple steps to start
1.
Press
Power
to turn the dryer on.
2.
Turn the
Cycle Selector
to select a cycle.
3.
Change the cycle settings (
Dryness
,
Temp.
, and
Time
) as necessary.
4.
Select desired options as necessary.
5.
Press and hold
Start/Pause (Hold to
Start)
.
To change the cycle during operation
1.
Press
Start/Pause (Hold to Start)
to stop
operation.
2.
Select a different cycle, and repeat
steps 2-4 above if necessary.
3.
Press and hold
Start/Pause (Hold to
Start)
again to start the new cycle.
Untitled-1 34
11/22/2018 12:10:54 PM