manualshive.com logo in svg

Samsung DVG45T6200 Series, User Manual, Page: 38 / 60

Share
Download
Samsung DVG45T6200 Series User Manual Download Page 38

Engl

ish

English

38

Operations

WARNING

To reduce the risk of fire, electric shock, or injury, read the “

Safety information

” before operating this 

appliance.

Control panel

02

01

03

04

05

06

07

08

09

12

13

10

11

01

 

Cycle Selector

Turn the Cycle Selector to select the desired cycle. The indicator by the cycle 
name lights up.
• 

Steam Cycles

: The dryer sprays water into the drum to deodorize clothes 

and reduce static electricity and wrinkles.

• 

Manual Dry

: The drying time is fixed.

02

 

Digital Graphic 

Display

Displays all cycle information, including the cycle time, information code, 
and operating status.

03

 

Dryness

Press to select a dry level. You can select from 5 different options (Less to 
More). Please refer to following recommendations to select the appropriate 
dryness.
•  For larger or bulkier loads, select More for complete dryness.
•  For items that needs to lay flat or hang to dry, use Less to partially dry 

items.

NOTE

This option is not available with 

REFRESH

, 

STEAM SANITIZE

, 

TIME DRY

, 

QUICK DRY

, and 

AIR FLUFF

.

Untitled-18   38

2023-06-29( )     3:23:50

Summary of Contents for DVG45T6200 Series





























































Reviews:

No comments