Engl
ish
Operations
English
50
Special features
Child Lock
Child Lock prevents children from playing with the dryer. When Child Lock is activated, all buttons except
for the
Power
button are disabled.
To activate/deactivate Child Lock, simultaneously press and hold
Dryness
and
Temp.
for 3 seconds.
NOTE
Once Child Lock is activated, it will remain active even after you restart the dryer. If other buttons, except
for the
Power
button, do not respond, check the Child Lock indicator. If the indicator is on, follow the
instructions above to turn Child Lock off.
Sound Off
You can turn on or off the sound from the dryer. Please note that this setting does not affect the sound that
notifies information codes and Damp Alert.
• To mute the sound, hold down
Drum Light
for 3 seconds.
• To unmute the sound, hold down again for 3 seconds.
Smart Control
To enable this function, you must first download the Samsung Smart Washer/Dryer app at the Play Store or
the App Store and install it on a mobile device featuring a camera function. The Smart Control function has
been optimized for Galaxy & iPhone series (applicable models only).
1.
When the dryer detects an issue to check, an information code appears on the display. To enter Smart
Control mode, press and hold
Wrinkle Prevent
for 3 seconds.
2.
The dryer starts the self-diagnosis procedure and displays an information code if a problem is detected.
3.
Run the Samsung Smart Washer/Dryer app on your mobile device, and then tap
Smart Control
.
4.
Put the mobile device close to the dryer’s display so that the smartphone camera and the dryer face
each other. The app automatically recognizes the information code.
5.
When the information code is recognized correctly, the app provides detailed information about the
problem with applicable solutions.
NOTE
• The function name, Smart Control, may differ depending on the language.
• If light is reflected off the dryer’s display, the app may fail to recognize the information code.
• If the app fails to recognize the information code, you can enter the code manually in the app.
Untitled-2 50
2023-03-09 5:41:06
