DTS
28
If your A/V receiver is equipped with a DTS decoder, your DVD-
VCR can output DTS digital sound, but you MUST enable this
feature in the menu system.
NOTE: Select “On” ONLY if you have connected a DTS-equipped
A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on
the DVD-VCR back panel.
1
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2
Select “DVD Setup”
Using the up and down buttons, move the selection cursor to “DVD
Setup,” then press ENTER to select.
3
Set “DTS”
Move the selection bar to “DTS,” then press right or left to select
from the following options:
• Off - To use your DVD/TV with an A/V receiver NOT equipped
with a DTS decoder.
• On – To use your DVD/TV with an A/V receiver equipped with a
DTS decoder.
On
Off
