Step
Getting Connected
Step
Basic Operation
Quick Setup Guide
Step
Step
Getting Connected
Select one of the following three types of connections:
A DVD Re TV
A Set-Top Box or VCR + DVD Re TV
A DVD Re TV
Connect the signal source to the DVD Recorder
Use a TV antenna or coaxial cable to connect the signal source
coming from the antenna or wall to the VHF/UHF RF-IN jack on the
DVD Recorder.
Connect the DVD Recorder to the TV
Use the supplied RF cable to connect RF-OUT on the DVD
Recorder to the ANT jack on the TV. Then use the Video/Audio
Cable to connect ANALOG AUDIO OUT(R/L)/VIDEO OUT jacks on
the DVD Recorder to the Audio & Video jacks on the TV.
●
For better picture quality, if your TV has an S-Video jack, you can
use S-Video cable instead of the yellow video connector on the
Video/Audio cable.
●
For the best picture quality, if your TV has Component video
jacks, you can use component cables instead of the yellow video
connector on the Video/Audio cable.
If you have an AV amplifier
Connect either audio cables from the ANALOG AUDIO OUT jacks
on the DVD Recorder to the LINE IN jacks on your AV amplifier,
or a digital cable from the DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) jack on the DVD Recorder to the DIGITAL AUDIO IN
jack on your AV amplifier.
The VHF/UHF RF OUT jack of this product sends only signals received through the antenna. It does not output audio/video signals.
You must use one of the following connections on this unit.
This Recorder will only record on
DVD-R, DVD-RW and DVD-RAM discs.
C Samsung Electronics
Printed in Korea
English-1
