Installation
English
21
Connecting the drain hose
CAUTION
Do not extend the drain hose.
• Since water may leak from the connected part, be sure to one long drain hose instead
of connecting short ones. If you cannot help connecting more than one hose, be sure to
seal the connected parts with silicone sealant. (Do not use the electric insulating tape
for sealing.)
The end of the drain hose can be positioned in three ways:
C
B
A
1.
Over the edge of a wash basin: The
drain hose must be placed lower than
90 cm. If the end of the drain hose
needs to be placed above the ground,
we recommend a height of
60−90 cm
(*)
. To keep the drain hose spout bent,
use the supplied plastic hose guide.
Secure the guide to the wall with a
hook or to the tap with a piece of
string to prevent the drain hose from
moving.
2.
Assemble the
drain hose (A)
and the
hose guide (B)
and fix them with the
cable-tie (C)
.
3.
You can drain the condensed water by
connecting the accessory hose (long
drain hose) to the drain-outlet directly.
Connecting the direct-hose
You can immediately drain the condensed water that comes out while drying, by
connecting the drain hose to the tap.
A
1.
Assemble the
hose connector (A)
and
the hose.
CAUTION
Since there is a danger of water leaking
from the hose connecter and accessory
hose, make sure that they are connected
firmly.
DV6000K_DC68-03709C_EN (U.K ).indd 21
4/7/2016 2:17:36 PM