Installation
English
20
Engl
ish
STEP 3
Connect the drain hose
A
B
• We strongly recommend connecting the drain hose
to your drainage system.
• If the drain hose connected on the dryer is too short
to reach the drainage system, use the provided
accessory hose (long drain hose).
• Use the built-in water tank only if you cannot connect
the drain hose to a drainage system.
NOTE
As a factory default, this dryer is set to use the built-in
water tank to drain condensed water.
B
A
1.
Remove the drain hose from
hole (A)
, and insert it
into
part (B)
.
A
2.
Insert one end of the accessory hose (long drain
hose) into
hole (A)
.
3.
Insert the other end (outlet) of the accessory hose to
the drainage system in one of the following ways:
B-PJT_DV9400B_SimpleUX_WEB_English.indd 20
2022/7/14 15:08:14
