
Installation
English
19
STEP 3
Connect the electrical wiring
First, read through the “
Electrical requirements
” section, and then follow these steps.
3-wire system
A
B
E
C
D
A.
External ground connector
B.
Neutral grounding wire (white)
C.
Center silver-colored terminal block
screw
D.
Neutral wire (white or center wire)
E.
¾” (1.9 cm) UL-listed strain relief
1.
Loosen or remove the center terminal
block.
2.
Connect the neutral wire (white or
center wire) of the power cable to the
center, silver-colored terminal screw of
the terminal block. Tighten the screws.
3.
Connect the other wires to outer
terminal block screws. Tighten the
screws.
4.
Tighten the strain relief screws.
5.
Insert the terminal block cover into the
rear panel of the dryer. Then, secure the
cover with a hold-down screw.
CAUTION
• To convert from the 4-wire system
to 3-wire system, connect the ground
strap to the terminal block support to
ground the dryer frame to the neutral
conductor.
• Ring-type terminals are recommended.
If using strap terminals, make sure they
are tightened.
DV8700K-03170T-00_EN (US)_151130.indd 19
2015-11-30 12:26:44
Summary of Contents for DV50K8600G
Page 1: ...Dryer User manual DV50K8600E G DV8700K 03170T 00_EN US _151130 indd 1 2015 11 30 12 26 40 ...
Page 55: ...Memo DV8700K 03170T 00_EN US _151130 indd 55 2015 11 30 12 26 52 ...
Page 111: ...Mémo DV8700K 03170T 00_CFR US _151201 indd 55 2015 12 01 1 15 20 ...
Page 167: ...Notas DV8700K 03170T 00_MES US _151201 indd 55 2015 12 01 6 58 57 ...