operating Instructions, tips
_25
Digital Graphic
Display
The display window shows the estimated time remaining in the cycle after the
Start/Pause button is pressed. The estimated time remaining may fl uctuate as the
cycle progresses.
The Drying light will illuminate and remain lit until the cycle is complete.
When your dryer is in the cool-down phase, the Cooling light will illuminate.
When your dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will
illuminate.
When the cycle is complete, “END” appears in the display panel until the dryer door is
opened, the Power, Close or Start button is pressed or about 5 minutes have passed.
If your dryer is paused during a cycle, the indicator lights will blink until the Start/
Pause button is pressed.
Select Cycle
Option
Wrinkle Prevent
-Wrinkle Prevent provides approximately 90 minutes of
intermittent tumbling in unheated air at the end of the cycle to reduce wrinkling.
Press the Wrinkle Prevent button to activate this feature.
The indicator light above the pad will illuminate when Wrinkle Prevent is selected.
The load is dry, and can be removed at any time during the Wrinkle Prevent cycle.
Mixed Load Bell
- This is an alarm that notifi es the user when the average dry
level is damp dry (80% dried). This is useful when the laundry contains various
types of clothing you do not want to dry completely. An alarm sounds for fi ve (5)
seconds while continuing to perform the cycle.
This function can only be selected in the Sensor Dry course, and the dry level can
only be selected from among Normal Dry, More Dry.
Delay Start
: Any cycle can be delayed for up to 24 hours in one-hour
increments. Displayed hour indicates the time at which the wash will be
started
My Cycle
: Choose your favorite cycle including cycle, temp, dry level option,
etc. (See page 27 for detail.)
Rack Dry
: Rack Dry is available at Time Dry cycle. Temperature will be set
only to Extra Low. (See page 28 for detail.)
Adjust Time
– Time can be added or subtracted from the automatically set times
in the Manual Dry cycles (Time Dry, Quick Dry, Wrinkle Release cycles).
To add or subtract time from the cycle, press the Adjust Time arrow pad up or
down until the desired time is displayed.
Dry Level
Selection Button
To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
press the Dry Level button. An indicator light will illuminate next to the desired
dryness level.
Press the button repeatedly to scroll through the settings. Larger or bulkier loads
may require the Very Dry or More Dry setting for complete dryness.
The Less Dry setting is best suited for lightweight fabrics or for leaving some
moisture in the clothing at the end of the cycle. Damp Dry is designed to partially
dry items. Use for items that lay fl at or hang to dry.
02 operating Instructions, tips
4
3
2
DV431AEP-03021B-02_EN.indd Sec13:25
DV431AEP-03021B-02_EN.indd Sec13:25
2011-04-27
12:07:55
2011-04-27
12:07:55
