English -
28
probleM
soluTion
Shuts off before load is dry
•
The dryer load is too small. Add more items or a few towels and
restart the cycle.
•
The dryer load is too large. Remove some items and restart the dryer.
lint on clothes
•
Make sure the lint filter is cleaned before every load. With some loads
that produce high amounts of lint, it may be necessary to clean the
filter during the cycle.
•
Some fabrics are lint producers (for example, a fuzzy white cotton
towel) and they should be dried separately from clothes that are lint
trappers (for example, a pair of black linen pants).
•
Divide larger loads into smaller loads for drying.
•
Check pockets thoroughly before washing and drying clothes.
Garments still wrinkled after
Wrinkle release
•
Small loads of 1 to 4 items work best.
•
Load fewer garments. Load similar-type garments.
odors remain in clothing
after air fluff.
•
Fabrics containing strong odors should be washed in a normal cycle.
InformatIon coDES
If an information code occurs, first all 8 LEDs turn ON and next the corresponding LED will be blinked while
it happens.
information
code
Temp.
dry Time
extra
low
low
Medium
high
20 min
40 min
60 min
80 min
dc
o
ac
o
bc2
o
Tc2
o
dF
o
hc
o
9c1
o
Fc
o
o
inForMaTion
code display
Meaning
soluTion
Tc
The thermistor resistance is very low
or high.
Clean the screen or vent.
If the problem continues, call for service.
hc
Invalid heating Temp in running the
dryer).
Call for service.
dc
Running the dryer with door open.
Close the door and then restart.
If the problem continues, call for service.
Fc
Invalid power source Frequency.
Try restarting the cycle.
If the problem continues, call for service.
9c1
Electronic Control Problem
(Invalid Voltage).
Call for service.
ac
Electronic Control Problem
(Invalid Communication).
Call for service.
dF
Invalid door.
Call for service.
bc2
Electronic Control Problem
(Button Key Input Check).
Call for service.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG).
troubleshooting
DV3000J_DV40J3000EW_USER MANUAL_DC68-03170N_EN.indd 28
2014/12/30 15:14:49