PCB Diagram _ 55
6. PCB DIAGRAM
6-1. MAIN PCB
Location
Part No.
Function
1
CN1
AC CONNECTOR
Supplies AC power to the PBA.
2
CN2
SUB PBA COMMUNICATION
CONNECTOR
The connector that controls communications with the Sub PBA
corresponding to the Display.
3
CN3
MICOM FLASH CONNECTOR
The connector that writes software onto the Micom.
4
CN4
SENSOR CONNECTOR
Connects the temperature sensor in order to detect the
temperature of the heater.
5
CN5
VALVE CONNECTOR
It is connected to the Steam Valve(Steam Models Only) and the
Lamp of the Drive Block and controls the ON/OFF signal.
Location
Part No.
Function
6
CN6
SET GROUND CONNECTOR
The plug connecting the Dryer Set and the ground of the PBA.
7
CN7
REACTOR CONNECTOR
The plug connecting the motor over-current protection reactor
and the motor control circuit.
8
RY5
MOTOR OPERATION RELAY
The relay that turns the Main Motor on and off.
9
RY6
HEATER OPERATION RELAY
The relay that turns the Heater on and off.
1
8
2
3
4
7
5
6
9