manualshive.com logo in svg

Samsung DV316LGW/XAA, Service Manual, Page: 41 / 86

Share
Download
Samsung DV316LGW/XAA Service Manual Download Page 41

5-4

Part Name

Descriptive Picture

How To Do

Drum Re-

moval

Rear Roller 

Removal

Motor/

Blower

Assembly 

Removal

(1)

####

1.Disconnect power supply to unit.
2.Remove Top Cover.
3.Remove Console.
4.Remove Front Panel.
5.Remove Console Back Cover.
6.Remove Front Bulkhead.
7.Remove belt from Idler Pulley.
8.Grasp the Drum with one hand
  and the belt with the other. Lift
  the Drum and slide out the front.
  Carefully spread the cabinet as
  needed to gain additional
  clearance.

1.Disconnect power supply to unit.
2.Remove Rear Bulkhead.
3.Remove Roller Keeper and nut.

1.Disconnect power supply to unit.
2.Remove Top Cover.
3.Remove Console.
4.Remove Front Panel.
5.Remove Console Back Cover.
6.Remove Belt from Idler Pulley.
7.Remove Drum.
8.Remove the two screws securing
  the Blower Intake Panel to the
  Blower Housing. Remove Blower
  Intake panel.
9.Removed the screw at the
  bottom of the blower housing.
10.Remove the blower attachment
  screw under the Thermistor.
11.Remove two screws attaching
  the motor bracket to the base.
12.Disconnect the Motor wire
  harness and the two wires to the
  belt switch.

Summary of Contents for DV316LGW/XAA























































































Reviews:

No comments