Samsung DV316LGW/XAA Service Manual Download Page 40 | Manualshive

Page: 40 / 86

Samsung DV316LGW/XAA Service Manual Download Page 40

5-3

Part Name

Descriptive Picture

How To Do

Front Panel

Removal

Front Bulk-

head

Removal

Moisture

Sensor

Removal

####

1.Disconnect power supply to unit.
2.Remove Top Cover.
3.Remove Console.
4.Remove four screws attaching
  Front Panel to dryer.
5.Remove two screws in the door
  area.
6.Pull Front Panel forward and
  disconnect the Interior Light
  harness.
7.Lift the Front Panel off the three
  tabs across the bottom and
  remove.

1.Disconnect power supply to unit.
2.Remove Top Cover.
3.Remove Console.
4.Remove Front Panel.
5.Remove screws retaining
Console Back Cover.
6. Disconnect Interior Light wiring
   harness.
7.Disconnect Moisture Sensor
   wiring harness.
8.Remove four Bulkhead retaining
   screws.
9.Lift Bulkhead from Cabinet and
   remove.

1.Disconnect power supply to unit.
2.Remove Top Cover.
3.Remove Console.
4.Remove Front Panel.
5.Disconnect Moisture Sensor wire
harness.
6.Remove sensor attachment
screw.

«
...
38
39
40
41
42
...
»

Summary of Contents for DV316LGW/XAA























































































Reviews:

No comments