Samsung DTB-D700F, Service Manual, Page: 20 / 57

Operating Instructions
Samsung Electronics
2-17
DTB-D700F
GB-43
GB
/ DVD PL
A
YER
SETUP
FUNCTIONS (DVD)
5.4 Setting Up the Display Options
●
Using the Display Options with the unit in Stop mode, press the DISPLA
Y
key
.
Select Display Setup using the
/
keys, then OK key
.
●
Use the
/
keys to select the sub item.
• TV
Aspect
Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio). - 16:9 Wide : Y
ou can view the full 16:9 picture on your widescreen
TV
.
- 4:3 Letterbox :
Select when you want to see the total 16:9 ratio screen. DTB-D700F supplies, even though you have a
TV with
a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
- 4:3 Pan-Scan :
Select this for conventional size
TVs when you want to
see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut
of
f.)
• Screen Messages
Use to turn on-screen messages On or Of
f.
• Front Display
Adjust the brightness of the unit’
s front panel display
.
- Dim for playback
: Makes the Front Panel Display dim
automatically when playing a DVD.
- Dim
:
Makes the Front Panel Display dim.
- Bright
:
Makes the Front Panel Display bright.
• Screen Saver
T
ime
This Screen Saver
T
ime (2min, 10min, 30min or never) should
be set because the CR
T
or LCD panel of
TV or a monitor may
be damaged while the picture is paused.
•
Audio Screen Saver
This
Audio Screen Saver (on or of
f) should be set because the
CD or MP3 mode screens are fixed and it may cause the
CR
T
or LCD panel of
TV or a monitor to be damaged.
• SCAR
T
Output
Sekect the SCAR
T
o
utput type. (RGB or Composite)
●
Then press the OK key to select the desired item.
DTB-D700F
GB-42
DTT RECEIVER
SETUP
FUNCTIONS (DVD)
5.3 Setting Up the
Audio Options
●
Using the Display Options with the unit in Stop mode, press the DISPLA
Y
key
. Select
Audio Setup using
/
keys, then OK key
.
●
Use the
/
keys to select the sub item.
• Dolby Digital
- PCM
: Converts to PCM(2CH) 48kHz audio.
Select PCM when using the
Analog
Audio
Outputs.
- Bitstream
: Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio
Output.
NN
oo
ttee
:
Be sure to select the correct Digital Output or no audio will be heard.
• MPEG
- PCM
: Converts to PCM(2CH) 48kHz audio.
Select PCM when using the
Analog
Audio
Outputs.
- Bitstream
: Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio
Output.
• DTS
- On
: Outputs DTS Bitstream via digital output only
.
Select DTS when connecting to a DTS
Decoder
.
- Of
f
: Doesn’t output digital signal.
• Dynamic Compression
- On
: Select this when the amplifier connected to the
player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHz.
- Of
f
: If the disc is copy protected, the output will be 48KHz.
If not, the output will be 96KHz.
• PCM Down Sampling
- On
: Select this when the amplifier connected to the
player is not 96KHz compatible. In this case, the 96KHz
signals will be down converted to 48KHz.
- Of
f
:
If the disc is copy protected, the output will be 48KHz. if not, the output will be 96KHz.
●
Then press the OK key to select the desired item.
NN
oo
ttee
:
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.