Samsung DTB-D700F, Service Manual, Page: 14 / 57

Operating Instructions
Samsung Electronics
2-11
DTB-D700F
GB-31
/ DVD PL
A
YER
GB
3.1 Playing a Disc
Ensure that your DTB-D700F is connected correctly to the
TV and audio system, which are
output components.
T
u
rn on the power of the
TV and audio system. Ensure that the local code
of the DTB-D700F is matched to that of the disc. If not matched, your disc will not be played. The first time you press the DTT/DVD key to switch the DVD mode.
●
Play
-
Press the OPEN/CLOSE
(
) key
.
The ST
ANDBY
indicator light goes out and the tray opens.
Place a disc gently into the tray with the disc’
s label facing up.
-
Press the PLA
Y/P
AUSE (
/
❙ ❙
) key or OPEN/CLOSE
(
) key to close the disc tray
.
●
Stopping Play
-
Press the ST
OP
(
■
) key during playback.
●
Removing Disc
-
Press the OPEN/CLOSE key
.
●
Pausing Play
-
Press the PLA
Y/P
AUSE (
/
❙ ❙
) key on the remote during playback.
Screen stops, no sound.
-T
o resume again, press the PLA
Y/P
AUSE (
/
❙ ❙
) key once again.
●
Step Motion Play (Except CD)
-
Press the SKIP
(
❙
œœ
/
❙
) key on the remote during P
AUSE mode.
Each time the key is pressed, a new frame will appear
.
No sound is heard during STEP
mode.
-
Press the PLA
Y/P
AUSE (
/
❙ ❙
) key to resume normal play
.
(Y
ou can only perform step motion play in the forward direction.)
●
Slow Motion Play (Except CD)
-
Press the SEARCH (
œœ
/
) key on the remote during P
AUSE mode.
-
By pressing the SEARCH (
œœ
/
) key
, you can select slow motion play for
1/8, 1/4 or 1/2 of normal speed. No sound is heard during slow mode.
-
Press the PLA
Y/P
AUSE (
/
❙ ❙
) key twice to resume normal play
.
●
RESUME function
When you stop disc play
, the player remembers where you stopped, so when you press
the
PLA
Y/P
AUSE (
/
❙ ❙
) key again, it will pick up where you left of
f. (unless the disc is
removed,
the ST
OP
(
■
) key is pressed twice or the player is unplugged.)
NN
oo
ttee
:
-
If the player is left for screen saver time in pause mode, it will stop.
-
If the player is left in the stop mode for more than 5 minutes, the power will automatically shut of
f. (Automatic Power-Of
f Function)
-
If the player is left in the stop mode for more than two minute without any user interaction, a sreen saver will be activated. Press the PLA
Y/P
AUSE (
/
❙ ❙
) key to resume normal play
.
-
This icon indicates an invalid key press.
3. BASIC FUNCTIONS (DVD)
DTB-D700F
GB-30
DTT RECEIVER
2.4.5 System Information
If you have to contact your service provider or a service center they might ask for information available from this menu. Place the cursor on this sub menu and press the OK key
.
The following will be the on-screen display
.
2.4.6 Software Upgrade
Yo
u can download and upgrade the system software of the
receiver through a specific channel through a specific channel designated by the broadcaster
.
The distributor will provide you with more information about that. If you select to download a new software version, all your previous settings, access code and favourite channels etc. will be erased! Downloading may take a while during downloading don’t turn of
f the receiver
.
2.4.7 Copy Channel Data
If you want to copy the channel data from one receiver to another
, please follow the instruction below
.
Please make your own channel data, such as favorite & lock channel with your own master box. Then take your master box when you install another box. 1. Plug on both master & slave receivers 2. Master Box(Installed Box) : Stand-by Mode 3. Slave Box(Installing Box) : Menu Mode 4. Connect 2 Boxes with RS232 serial cable
(Both end should have male connector)
5. Select the ‘System Setup’
and press the OK key
.
6. Select the ‘Copy Channel Data’
with the
/
keys.
7. Press ‘OK’
to start channel data copy
OPERA
TING THE RECEIVER