Samsung DS 24D User Instruction Download Page 18

Page: 18 / 131

DS 616

USER INSTRUCTIONS

TECHNICAL MANUAL

PART 1 JUNE 2004

1.17

1.14 ALARM REMINDER

Station users can have three alarms programmed at their phones. Each alarm may be
one of the following three types:

0. NOTSET

The alarm is not set.

1. TODAY ONLY The alarm will ring at the programmed time and be canceled

automatically.

2. DAILY

The alarm will ring each day at this time.

ACTION

DISPLAY

1. Press

the

Transfer key

followed by

112

Display shows

[201] ALM CLK(1)
HHMM:

NOTSET

2. Dial

–

to select the alarm (e.g.,

)

[201] ALM CLK(2)
HHMM:

NOTSET

Press

DOWN

to select alarm

Press the right soft key to move the cursor
OR

Press the left soft key to return to step 2

3. Enter alarm time in 24 hour format (e.g.,

1300

)

Display automatically advances to step 5

[201] ALM CLK (2)
HHMM:1300

NOTSET

4. Enter alarm type (e.g.,

)

[201] ALM CLK
HHMM:1300

DAILY

Press

DOWN

to select alarm type

Press the right soft key to move the cursor
and return to step 2

5. Press

the

Transfer key

to store and exit

Home Page

Table of Contents

Summary of Contents for DS 24D




































































































































Search results

Summary of Contents for DS 24D

Reviews:

Related manuals for DS 24D

Brands by name

Popular brands

Samsung DS 24D, User Instruction

Search results

Summary of Contents for DS 24D

Reviews:

Related manuals for DS 24D

Brands by name

Popular brands