Samsung DJ68-00858K User Manual Download Page 4

Page: 4 / 47

REP

ARA

TION

PREPARATION

Safety information

• Before operating the appliance, please read this manual thoroughly and

retain it for your reference.

• Because the following operating instructions cover various models, the

characteristics of your vacuum cleaner may differ slightly from those
described in this manual.

Caution/Warning symbols used

WARNING

Indicates that a danger of death or serious injury exists.

CAUTION

Indicates that a risk of personal injury or material damage exists.

Other symbols used

NOTE

Indicates that the following text contains additional important information.

Accessories

Accessories may differ depending on the models.

Spin Brush: 2 units

(Inside the product:

1 unit, Spare: 1 unit)

Dust Bag: 2 units

(Inside the product:

1 unit, Spare: 1 unit)

Pre-motor Filter:

2 units

(Inside the product:

1 unit, Spare: 1 unit)

Clean Station

Power cord

Boundary Markers

User Manual

❇

If you want to purchase an additional Dust Bag, check the model name (VCA-RDB95) and
SAMSUNG logo (

) first, then contact your nearest SAMSUNG Electronics retailer or

SAMSUNG service center.

English 3

VR8500_EN_00858K-00_EU.indd 3

2021-12-01 오전 10:32:32

Summary of Contents for DJ68-00858K
















































Search results

Summary of Contents for DJ68-00858K

Reviews:

Related manuals for DJ68-00858K

Brands by name

Popular brands

Samsung DJ68-00858K, User Manual

Search results

Summary of Contents for DJ68-00858K

Reviews:

Related manuals for DJ68-00858K

Brands by name

Popular brands