MAINTENANCE
Cleaning the Jet Bot
Before maintenance work, you should turn off the power switch at the side of the Jet Bot.
Emptying and cleaning the Dustbin
1
Grasp the Jet Bot’s cover at the groove and
lift it up.
2
Hold the Dustbin handle and lift the
Dustbin up.
3
Unlock the transparent clip at the side of
the Dustbin.
4
Detach the filter from the Dustbin.
5
Remove the dust on the filter and the
Dustbin, clean them with water, and dry
completely in the shade.
6
Attach the filter to the Dustbin and
insert the Dustbin into the Jet Bot. When
inserting the Dustbin, grasp the handle and
put the Dustbin into both grooves.
MAINTENANCE
English 23
VR8500_EN_00858K-00_EU.indd 23
2021-12-01 오전 10:32:45
