OPERA
TION
Using the Jet Bot
Before using the Jet Bot, press the power switch at the side of the Jet Bot to turn the Jet Bot
on.
❇
❇
For the normal use of the Jet Bot’s functions, the SmartThings connection is required.
– For downloading and installing the SmartThings App, refer to the ‘SmartThings
App(P.30-34)’.
Basic use
OFF
ON
Power on / off
Press the power switch at the side of the Jet
Bot to turn the Jet Bot on.
• During booting, the Jet Bot’s Status
Indicator turns on with a melody which
stops when the booting is complete.
Starting cleaning
Press the [
] on the Jet Bot to start
cleaning in Auto Clean.
Stopping cleaning
• Press the [
] on the Jet Bot to stop
operation while cleaning.
– When pressing the [ ], the Jet Bot
returns to the Clean Station and starts
charging.
❇
❇
If the Jet Bot does not operate for
20 minutes after it stops operation, it
automatically returns to the Clean Station
to recharge.
Sleep Mode
• When the Jet Bot is not in operation, press
and hold the [
] to set the Sleep Mode.
• In the Sleep Mode, press the [
] to cancel
the Sleep Mode.
English 17
VR8500_EN_00858K-00_EU.indd 17
2021-12-01 오전 10:32:39
