English
English
10
Before you start
Installation
Install the product according to the instructions in this manual and local codes.
Installing the product
1.
Select a solid, level location with adequate space for the following clearances.
Top
25 mm
Sides
14 mm
Rear
15 mm
-
If the minimum clearances are not met, performance will decrease due poor ventilation and
condensation may occur on the product exterior.
-
Do not install the product in direct sunlight or hot and cold places. The ambient temperature must be
between 10 °C - 35 °C. If the ambient temperature is too high or too low, the product may not operate
normally, or performance may decrease.
A
2.
Turn the
levelling feet (A)
clockwise or
counterclockwise to adjust the height until the
product is level.
B
NOTE
If the product wobbles or if you want to raise the
height of the rear side, assemble the provided rear
levelling feet (B)
on the bottom-rear sides of the
product.
Untitled-1 10
2021-06-16 3:31:03
Summary of Contents for DF60A8100HG
Page 1: ...Clothing Care System AIRDRESSER User manual DF60 8 G Untitled 1 1 2021 06 16 3 31 02 ...
Page 3: ...English English 3 Specifications 40 Specification sheet 40 Untitled 1 3 2021 06 16 3 31 02 ...
Page 41: ...Memo Untitled 1 41 2021 06 16 3 31 10 ...
Page 42: ...Memo Untitled 1 42 2021 06 16 3 31 10 ...
