Samsung DB43J User Manual Download

Page: 68 / 156

ID Settings

HOME

→

ID Settings

→

ENTER

ID Settings

– The displayed image may differ depending on the model.

Assign an ID to a set.

Device ID

Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)

―

Press

to select a number, and press

― Enter the number you want using the number buttons on the remote control.

Device ID Auto Set

This feature automatically allots an ID number to a device connected via an RS232C cable.
When multiple devices are connected, enable the feature on either the first or last device.

― This function is only available on the first device within an RS-232C daisy chain.

PC Connection Cable

Select a method to connect to MDC to receive the MDC signal.

•

RS232C cable

Communicate with MDC via the RS232C-stereo cable.

•

RJ-45 (LAN)/Wi-Fi Network

Communicate with MDC via the RJ45 cable.

―

For the models (QB65H-N and QB75H-N) that do not support wireless connection, only the

RJ-45 (LAN)

appears.

Summary of Contents for DB43J





























































































































































Search results

Summary of Contents for DB43J

Reviews:

Related manuals for DB43J

Brands by name

Popular brands

Samsung DB43J, User Manual

Search results

Summary of Contents for DB43J

Reviews:

Related manuals for DB43J

Brands by name

Popular brands