Samsung DB43J User Manual Download

Page: 42 / 156

Connecting and Using a Source Device

Before Connecting

Pre-connection Checkpoints

―

Before connecting a source device, read the user manual provided with it.

The number and locations of ports on source devices may differ from device to device.

― Do not connect the power cable until all connections are completed.

Connecting the power cable during connection may damage the product.

― Connect the sound ports correctly: left = white and right = red.

― Check the types of ports at the back of the product you want to connect.

― We recommend using authorized cables for HDMI or DP cable connections.

Connecting to a PC

• Do not connect the power cable before connecting all other cables.

Ensure you connect a source device first before connecting the power cable.

• A PC can be connected to the product in a variety of ways.

Select a connection method suitable for your PC.

―

Connecting parts may differ in different products.

Connection Using an HDMI Cable

DBJ / QBH: HDMI IN 1 (ARC), HDMI IN 2

QHH: HDMI 1 (ARC), HDMI 2

QMH: HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN)

Chapter 03

Summary of Contents for DB43J





























































































































































Search results

Summary of Contents for DB43J

Reviews:

Related manuals for DB43J

Brands by name

Popular brands

Samsung DB43J, User Manual

Search results

Summary of Contents for DB43J

Reviews:

Related manuals for DB43J

Brands by name

Popular brands