Selecting and loading print media
_ 29
CHANGING THE SIZE OF THE PAPER IN THE
PAPER TRAY
To load different sizes of paper, such as Legal-sized paper, you need to
adjust the paper guides to extend the paper tray.
1.
Pull the tray out of the machine. Open the paper cover and remove
paper from the tray if necessary.
2.
Pressing and unlatching the guide lock in the top of the tray, pull the tray
out manually.
3.
Load paper into the tray.
4.
Slide the paper length guide until it lightly touches the end of the paper
stack. Squeeze the paper width guide and slide it to the edge of the
paper stack without causing it to bend.
For paper smaller than Letter-sized, return the paper guides to their
original positions and adjust the paper length guide and paper width
guide.
If the paper that you need to print is shorter than length 222 mm (8.74
inches), press and unlatch the guide lock in the tray, push the tray in
manually.
Adjust the paper length guide and paper width guide.
1
Tray extend lever
2
Paper length guide
3
Paper width guide
4
Paper cover
•
Do not push the paper width guides far enough to cause the
materials to warp.
•
If you do not adjust the paper width guides, it may cause paper
jams.
