Introduction
_ 19
UNDERSTANDING THE CONTROL PANEL
The color of the status and toner colors LED indicates the machine's current
status.
LEDs
]
Stop button
STATUS LED
TONER COLORS LED
DESCRIPTION
lights green
all LEDs off
The machine is ready to print.
slowly blinks
green
all LEDs off
The machine is receiving data from the computer.
fast blinks green
all LEDs off
The machine is printing data.
lights red
all LEDs off
•
The machine is experiencing an error, such as jammed paper, open cover, empty paper, not
installed waste toner container, or full waste toner container.
•
The machine is experiencing a service required error, such as LSU error, fuser error, or ITB error,
Contact your sales or service representative.
lights green
each LED blinks red
Each toner cartridge is near the end of its life.
blinks red
each LED lights red
Each toner cartridge is almost empty. You can print, but the quality is not reliable.
lights red
each LED lights red
•
Each toner cartridge is totally exhausted. You can not print.
•
Each toner cartridge is wrong.
lights green
each LED blinks red in a
repeated order
The machine is warming up.
All printing errors will be appear in the
Smart Panel
program window.
STATUS LED
DESCRIPTION
Printing demo page
In Ready mode, press and hold this button for about 2 seconds until the status LED blinks slowly, and release.
Printing configuration sheets
In Ready mode, press and hold this button for about 5 seconds until the status LED blinks fast, and release.
Canceling print job
Press this button during printing. The red LED blinks while the print job is cleared from both the machine and the
computer, and then the machine returns to ready mode. This may take some time depending on the size of the print job.
