Samsung CLX-9251 Series Service Manual Download Page 215

Page: 215 / 481

4. Troubleshooting

4.4.5.3. Scanner Diagnostics

Shading Test

•

Diagnostics > Scanner Diagnostics > Shading Test

Purpose

To check quality of scanned images, especially defect in optical devices, including lens, mirror,
lamp, and etc, are suspected.

Operation Procedure

Press "Share and Print report“ to see if the current shading value is correct.

Mono, red, green, blue gray shading values will be shown on the printed report.

When the previous shading value is needed, press “Print Last Shade Report”.

Scanner/DADF NVM Read/Write

•

Diagnostics > Scanner Diagnostics > Scanner/DADF NVM Read/Write

Purpose

To read and/or write values in the scanner and DADF memory.

Operation Procedure

When the main “NVM Read/Write” window displays, users can navigate through the list of codes
with descriptions and saved values.

Users can also directly input a code to the text box to find a NVM.

After selecting a code, the “Edit” button will be enabled only if the code is writable.

If the selected code is writable and the “Edit” button is enabled, press the button to configure the
desired value for the code.

Code

NVM Description

Meaning

Access

05-0000

Pick up Count

Pick up Roller Life Count

Read Only

05-0010

Document Duplex Reverse Point

Read/Write

05-0020

Document Exit Turn Reverse Point

Read/Write

4-30

Summary of Contents for CLX-9251 Series

























































































































































































































































































































































































































































































Search results

Summary of Contents for CLX-9251 Series

Reviews:

Related manuals for CLX-9251 Series

Brands by name

Popular brands

Samsung CLX-9251 Series, Service Manual

Search results

Summary of Contents for CLX-9251 Series

Reviews:

Related manuals for CLX-9251 Series

Brands by name

Popular brands