English-18
Setting Up Your Remote Control
Setting Up the Remote control to Operate Your VCR
1.
Turn off your VCR.
2.
Press the
VCR
button on your TV’s remote control.
3.
Press the
SET
button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits of the VCR
code listed on page 20 of this manual for your brand of VCR. Make sure you
enter three digits of the code, even if the first digit is a “0”. (If more than one
code is listed, try the first one.)
5.
Press the
POWER
button on the remote control. Your VCR should turn on if
your remote control is set up correctly.
If your VCR does not turn on after set-up, repeat steps 2, 3 and 4, but try one of
the other codes listed for your brand of VCR. If no other codes are listed, try
each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in “VCR” mode, the volume buttons still control your
TV’s volume.
After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box.
Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of
equipment you choose.
➢
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
Setting Up the Remote control to Operate Your Cable Box
1.
Turn off your cable box.
2.
Press the
CABLE
button on your TV’s remote control.
3.
Press the
SET
button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits of the cable
box code listed on page 21 of this manual for your brand of cable box. Make
sure you enter three digits of the code, even if the first digit is a “0”. (If more
than one code is listed, try the first one.)
5.
Press the
POWER
button on the remote control.
Your cable box should turn on if your remote control is set up correctly.
If your cable box does not turn on after set-up, repeat steps 2, 3 and 4, but try
one of the other codes listed for your brand of cable box. If no other codes are
listed, try each code, 000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in “CABLE” mode, the volume buttons still control your
TV’s volume.
Continued...
AA68-03782C-01Eng 4/21/06 8:48 AM Page 18
